RINSING BALL VALVE
The rinsing ball valve has been designed to replace the previously
known combination of a separate ball valve and a rinsing flange
(purge ring) used with clogging fluids. In this design, the rinsing
system has been designed as an integral part of the structure, offering
shorter length and improved simplicity.
The valve has a ring shaped water duct which divides into four
smaller ducts having eccentric bores for keeping the transmitter
diaphragm free from solids. Fluid connection to the process can
be ensured with a repetitive rinsing operations.
The rinsing connector is equipped with a plug or with other equipment
such as ball valve, rotameter etc.. The rinsing connector should
be equipped with a check valve to prevent blockages in the event
of a water cut off.
The valve is available with DIN & ANSI flanges. The standard size
is DN80 PN40.
The valve has stainless steel wetted parts.
|
