ISA 1932 NOZZLE

Another widely used ISO 5167 application is a ISA1932 flow nozzle. It is available in various structures depending on the use. A nozzle applies equally well to both low and high pressure flow measuring. A nozzle is mostly used in high pressure and temperature water lines such as the feed water line. The purchasing prices are somewhat more expensive than that of an orifice plate.

A nozzle has a slightly lower shape resistance compared to an orifice plate which makes the instrument more efficient (Smaller pressure loss) A nozzle can withstand solid particles very well. The required straight lengths are approximately 26D.

In most cases connection to the process is by welding.

• PN64 - PN400
• DN50 - DN600
• Length according to DIN 19215 or tailored
• Materials are stainless steel and heat resisting steels.

A nozzle is a relatively inexpensive instrument which suits well for liquid and steam at low flow rates.

As an instrument nozzle is not as fragile as an orifice plate. A nozzle has a long life span and it maintains it's accuracy very well.

A nozzle can be installed to the process before the blowout.

List of materials:

• ST35.8
• 15Mo3
• 13CrMo44
• 10CrMo910
• X10CrMoVNb91
• SA106B
• SA335P11
• SA335P12
• SA335P22
• SA336P91